MS Series Hydraulic Shock Test System

MS series shock test machine

MS series shock testing equipment is used to test the product’s or packaging’s resistance to shock. MS series shock test machine can be used for the shock test of conventional half-sine wave, postpeak sawtooth wave and trapezoidal wave etc, to find out the shock wave and enegry that may be suffered by the product in real environment, and in this way we can improve or optimize the product packaging structure systematically.

 

System overwiew

● MS series environmental testing machines based on windows operating system are fully-automatic and have friendly control interface. You only need to input the testing data in the operator, the system will automatically configure the parameters and control the machine, then complete the shock test precisely.

● MS series shock testing equipment has anti-secondary shock brake device. Shock table falls freely to the shock wave-shaped cushion, the hydraulic brake stops the movement of the piston after a rebound, then the shock table is braked and will not shock for a second time.

● Damping device is with high efficiency. When the shock is performed on a big shock test machine, the instant shock force will be very strong. However, a damping device can greatly reduce the shock to the ground. Therefore, the foundation is not needed and the machine is easy to install.

● The shock height is set digitally, so the shock table is automatically lifted to the set height with high control accuracy and good repeatability of the shock data.

● Configured shock measurement system displays the data of shock force and waveshape instantaneously.

● High acceleration generator can be configured. When testing small specimen, the shock testing equipment should be with high acceleration. Therefore, you can fix the high acceleration generator on the table of the shock test machine, the shock acceleration can be higher than the normal IS series shock machines according to the shock kinetic energy transfer theory. When the test specimens are smaller than 200 x 200mm, the peak of shock acceleration can be up to 5000-50000 m/s and acceleration can last for 0.2-1ms.

HSRS Series Pneumatic Shock Response Spectrum Test System

HSRS series pneumatic shock response spectrum test machine is a high quality shock testing equipment used to complete the shock response spectrum in environmental test. This kind of shock testing equipment can efficiently react much real impact on equipment damage, so we can analyse the impact of product design implementation.

Shock response spectrum test has become one of the environmental testings which has to be done in the field of aviation, aerospace, military-related research & production, major science & technology and some others.

HSRS series pneumatic shock response spectrum test machine consists of four parts and they are horizontal impact host, control system, measuring system and matched air source.

● Horizontal shock host consists of shock response spectrum resonance table, impact hammer, impact cylinder,cushion, brake device and base.

● Resonant table is made of high-strength die-casting aerospace aluminum plate and has excellent strength and uniformity. Resonant table is guided by the imported horizontal guide rail and connected with the guide rail through the damping material. The table is smooth, so we can prevent it from rotation or deviation on one hand and ensure the frequency response of the table on the other.

● The shock hammer, which drives the high-speed impact shock response spectrum resonace table by shocking the cylinder, is intalled on the horizontal shock table through the horizontal guide rail. The shock hammer can be reset by reseting the cylinder.

● Shock cylinder mainly produces the horizontal impact speed and can move bidirectionally. FNS has applied for a patent for the impact cylinder which is very reliable and has fast accelaration and large energy.

Newly Exported Centrifuge with Lots of Technology Improvements

With the rapid growth of our export trade, our products and brand have attracted much international attention. In the last few years, our R&D team deeply realize that there is never a lack of competition in this market, we just need to become better and better and continue to innovate in order to even survive here.

Today it’s a pleasure to share with you all that our centrifuge research and development has made a big leap. Recently we have exported a new advanced centrifuge.
0002

Compared with the old type centrifuge, the new one has many improvements, such as faster acceleration and deceleration, more aesthetic appearance, less noise, more highly cost effective.

The most important advantage is the more high safety coefficient. We use a large number of more high quality materials to ensure the structure of the machine is solid and secure enough. So high repeatability is also a new bright spot of our centrifuge.
0001

We have built a strict quality-monitoring framework to control the quality of the raw materials and ensure that our products are of good quality. In production, 5S management code, ISO9001 system, standardized managing, and metrological verification are applied and quality control measures are taken in every link.

We are deeply aware that the interests of our customers are our interests and win-win is the goal we always pursue. We not only provide high quality products and services for customers, but also focus on establishing long-term strategic relationship with each customer.

TMC in 2017 Testing & Control International Exhibition

From 24th to 26th 2017, TMC had attend 2017 Testing & Control International Exhibition, which is the Russia’s largest Test and Measuring Equipment Trade Show.

102 companies from 8 countries participated in this Exhibition and present a wide range of testing ,controlling and measuring equipment.

TMC4

sales manager Fox is talking with potential customers about his project.

Also TMC had taken place as part of Testing & Control enrich the event with the new technology in the area of Rate tables.

In this Exhibition, Rate tables of TMC has been very impressive, because of the nice looking and high technology.

TMC5

Through 2017 Testing & Control International Exhibition, TMC will be more visible , bigger and better in the international market.

TMC3